RunCabin Blog · For working contractors
How far should I travel for jobs, and what should my website say?
November 18, 2026 · 8 min read
Short answer: draw the line by drive time, not miles, at the point where a normal job still pays after the round trip. Then put that area on your website in plain words: the towns you serve, and what happens just past them. Most owners have the line in their head already. The trouble is that nobody else can see it, so the phone keeps ringing from two counties over.
This comes up at two moments. When you are new, you say yes to everything, and one day you notice you spent more of the week in the truck than on a ladder. When you are established, you have more work than hours, and the far jobs are the first ones you wish you had turned down. Either way the fix is the same: decide the area on purpose, then say it where customers will read it before they call.
Why "we go anywhere" costs more than it looks
Drive time is the one part of the job nobody pays you for. A job 45 minutes away is an hour and a half of driving for the day. Do that five days in a row and you have driven seven and a half hours, close to a full working day, with nothing to invoice for it.
The drive is only the obvious cost. A far job also brings:
- The estimate visit. If you look at jobs in person, you make the trip once before you have earned anything, and again for every estimate you do not win.
- The forgotten part. A supply run that takes ten minutes near home can end the day when the job is an hour out.
- The callback. A small touch-up or warranty visit costs the same drive as the original job, with no bill at the end.
- The job you could not take. A long drive at each end of the day is often the difference between fitting two jobs in and fitting one.
None of this means far jobs are always bad. A large job can carry a long drive easily. A small one almost never can. That is why the answer is rarely one hard line.
Work it out by drive time, not miles
Ten miles across a city at rush hour and ten miles down an empty county road are different trips. So measure in minutes, at the time of day you would really be driving. An evening with your last few months of jobs is enough:
- List your last 20 to 30 jobs with the town and the rough size of each.
- Write the one-way drive time next to each, from wherever your day really starts: home, the shop, or the supplier you stop at most mornings.
- Mark the ones you were glad you took and the ones you would not take again.
- Look for the pattern. There is usually a drive time past which only the bigger jobs were worth it, and a longer one past which nothing was.
Those two numbers are your service area. They will be different for a house cleaner with four stops a day than for a remodeler who parks at one house for three weeks, and that is the point. Your own jobs tell you more than a rule of thumb from someone in another trade.
Three zones work better than one line
Most owners who think this through end up with three zones, not one circle:
- Your core area. The towns where you take any job that fits your work. No conditions.
- Your extended area. Towns where you will go for the right job. The condition can be a larger job, a trip charge you tell the customer before booking, or a set day of the week when you group the far jobs into one run.
- Everywhere else. A polite no, and a referral if you have one.
The extended zone is what keeps you from losing good work to a rigid rule. A full exterior repaint 50 minutes away may be well worth it. A single door 50 minutes away is not. Saying "larger projects only" for those towns lets you take the first without getting calls for the second. If you use a trip charge for the extended area, there is more on wording it in should I put a minimum job size or trip charge on my website?
What Google lets you set
If you work at customers' homes, your Google Business Profile has a service area setting. Google's help pages say you can list up to 20 service areas, by city, postal code or other area, and that the edge of your overall area should not be more than about 2 hours of driving time from where the business is based. Google describes the 2 hours as a guideline, and says a larger area can be appropriate for some businesses.
Two things about that setting are worth knowing before you fill all 20 slots:
- Listing a town does not make you show up there. Google names distance as one of its main local ranking factors, next to relevance and prominence. Adding a town an hour away mostly tells customers you will come, not Google that you should rank.
- It should match what you really do. A profile that claims half the state, next to a website that names six towns, looks careless to a customer comparing the two. Pick the real area and say the same thing in both places.
If what you want is to be found in the next town over, that is a different question, covered in do I need a separate page for every town I serve?
What to put on your website
The website is where the service area does its real work, because it is the one place a customer reads before they pick up the phone. The goal is simple: someone in your area should see their town and feel sure, and someone outside it should find out in ten seconds, not after a voicemail and a callback.
- Name the towns in plain text. A map image looks nice, but people scan for the name of their own town, and search engines and AI assistants read words, not pictures. A map is a fine extra. The list is the part that matters.
- Put the area where the decision happens. One line near the top of the homepage ("Serving Towson, Parkville, Perry Hall and nearby"), the full list in the footer, and a short version beside the quote form.
- Say what happens at the edge. One sentence covers the extended zone: "Outside these towns? We take larger projects a bit farther out. Ask us."
- Ask for the town or ZIP code on the quote form. It is one extra box, and it lets you sort requests before you spend a call on them.
- Leave your street address out if you work from home. A service area does that job better. See should I put my home address on my business website?
Some wording you can adapt:
- Simple list: "We serve Towson, Parkville, Perry Hall, White Marsh and Lutherville."
- Core plus extended: "Based in Towson. We work throughout northern Baltimore County, and take full interior and exterior projects in Harford County."
- With a trip charge: "No trip charge inside our main service area. Farther jobs carry a trip charge, which we tell you before we book."
- With route days: "We are in the Bel Air area on Thursdays."
A clear area also cuts down on the calls that waste the most time. Owners who buy leads from the big platforms describe the same pain again and again: "price-shoppers" and paying for leads that go nowhere. Your own website cannot fix a lead platform, but it can make sure the people who find you directly already know whether you come to their street.
How to turn down a job that is too far
However clear the site is, some out-of-area requests will still come in. The answer that costs you least is fast, kind and gives the person somewhere to go:
"Thanks for reaching out. We keep our work to the Towson area so we can get to every customer on time, and your address is past where we go. I would try [name], they do good work out your way."
A referral is worth keeping on hand. The customer remembers that you helped, and the owner you sent the job to tends to send the next one back when it lands closer to you. If the job is one you would take under the right conditions, say the condition instead of a flat no: a larger scope, a trip charge, or "we are out that way on Thursdays."
What to avoid is the slow no: taking the call, driving out to look, and then quoting a price padded to make the customer go away. It costs you the trip, and it leaves someone with a bad story about your prices.
When to redraw the line
A service area is not permanent. It is one of the things on a local-service website most likely to need changing:
- In the slow season, many owners widen the area and take jobs they would pass on in June.
- When you are booked out, pull the edge in. It is the gentlest way to slow the phone down. There is more in I'm booked out for weeks. What should my website say?
- When you hire, a crew member who lives on the other side of the county can open towns that never made sense before.
- When you move, the whole map shifts. See I'm moving my business to a new town. What do I change online?
Whenever the line moves, change it in both places on the same day: the website and the Google Business Profile. A site that still promises a town you stopped serving in the spring is how the wrong calls start again.
Where RunCabin fits
The service area is one of the first things a RunCabin website gets right. Our questionnaire asks which towns you serve and how you handle jobs past the edge, and we put the answer where it does its job: near the top of the homepage, in the footer, beside the quote form, and in the wording the site uses throughout. Like the rest of the site, it's built with AI and finished by a web developer, and you see a first version within 24 hours of sending your answers and photos. The site starts at $499 to build, then $39.99 a month for hosting, or $479.88 a year, with no long contract and no lead fees.
When the area changes, because the season turned or you hired someone across the county, it is a quick edit instead of a project, so the website keeps drawing the same line you would draw on the phone.
A website that says where you work
Answer our questionnaire and we build your site - your name, your work, your towns. It's built with AI and finished by a web developer. Starting at $499 to build, then $39.99 a month.
Start our planner →Related reading: should I put a minimum job size or trip charge on my website? · do I need a separate page for every town I serve? · how do I get my business to show up on Google near me?